极速3D

Welcome to Hebei Wanyabo Technology Co., Ltd.!

中文 | English

/en/data/upload/201911/20191121095824_490.jpg
Water field additives
  • WanyaboAUX WS
  • WanyaboAUX KS
  • WanyaboAUX KS-2
  • WanyaboAUX MT-50
  • WanyaboAUX MT-60
  • WanyaboAUX MT-80
  • WanyaboAUX MTB-300
  • WanyaboAUX M670
  • WanyaboAUX NPO-C

    WanyaboAUX WS

    WS is a mixture of anionic and nonionic surfactants.

    Attributes:

    Appearance:Colorless transparent liquid

    Ingredients: anionic and nonionic surfactants, a mixture of fungicides.

    PH :(10% Aqueous solution ) 6-7

    Effective: about 40%

    According to our recommended dosage application, the wastewater produced will not affect the ecological environment.

    Application:

    WS is a kind of soaking auxiliary that can accelerate the soaking speed of all kinds of raw leathers, and promote the rapid dissolving of soluble proteins, blood and dirt in leather without damaging collagens, so it is especially suitable for treating dry raw leathers. Using WS soaking auxiliary can shorten soaking time, and make leather fresh to facilitate for the following process. After treatment with this product, the fleshing process becomes significantly easier.

    WS does not need dilution and is used directly in main soaking.

    The amount of WS soaking agent depends on the original leather type and soaking time, generally taking 0.3-0.5% of leather weight. The amount should be appropriately increased for the original leather with high natural fat content and long soaking time.


    Operational safety: avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions: store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging and transportation:120kg ,150kg per plastic drum or iron drum, non-dangerous goods, transport according to the general cargo.

    WanyaboAUX KS

    KS is a new generation of liming agent with excellent comprehensive performance.

    Attributes:

    Appearance: brownish yellow liquid

    Ingredients: Special organic amine solution

    PH:11.0±0.5

    Effective object:45 (±2) %

    Application:

    KS can enhance the depilation effect of sulfide and lime during the process of liming and dehairing. With strong buffering effect, it can effectively restrain the excessive expansion of gray leather to avoid loose phenomena caused by excessive expansion.

    It is used in the liming process to make leather fibers distribute uniformly to eliminate the wrinkles of cow leather maximally and reduce difference between the middle ridge and side belly, slow the liming process mildly to avoid the loose surface in side belly.

    Special inhibitory function can effectively reduce cholasma and neck wrinkles. This product is widely used in the liming and dehairing process as well as reliming process of cow, goat and pig leather, especially suitable for pig and goat garment leather, cow sofa leather and soft Napa leather.

    Applications:

    Sheep clothing leather ash: (reduced bare skin after fading)

    In liming, use KS 0.5-1.5% with lime or with sodium hydrosulfide.

    Operational safety:avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions:存放于密闭容器中,储存在通风阴凉仓库,防暴晒、防冻、防水。

    Packaging and transportation:120kg,150kg per plastic drum, non-dangerous goods, transport according to the general cargo.


    WanyaboAUX KS-2

    KS-2 is an organic amine liming aid.

    Attributes:

    Appearance: colorless liquid

    PH:9-11

    Effective:50 (±2) %

    Solubility:98±2%

    Effective time: at least one year at room temperature in the house

    Characteristic:

    KS-2 is a kind of liming auxiliary that meets the requirements of environment protection. It can disperse the liming agents quickly and uniformly, slow down precipitation speed, help to open and expand wrinkles, and reduce neck wrinkles, belly wrinkles, coarse wrinkled skin and other textures to make leather smooth, fine, plump and soft.

    KS-2 can effectively disperse and dissolve natural oil, remove dirt on the leather surface, and make the color of wet blue skin uniform. It can be used in various temperature and climates.

    KS-2 can increase the dissolution of lime and improve liming effect.

    Application:

    It is mainly used to reduce various wrinkles and textures of wet blue during liming process, so as to make gray leather expand more evenly. The usage amount is recommended as below.

    Add 1-2% to the conventional liming process

    It can be used in immersion ash, and the dosage is adjusted to 0.5-2% according to different conditions.

    This product is slightly corrosive and can be washed with water.

    Operational safety: avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions:store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging and transportation:120kg,150kg per plastic drum , non-dangerous goods, transport according to the general cargo.


    WanyaboAUX MT-50

    It is made up of a variety of nonionic surfactants with super emulsification ability.

    Attributes:

    Appearance: light yellow transparent liquid

    Ingredients: Various nonionic surfactants

    Charge: non-ionic

    PH:(10% aqueous solution ) 6.0-8.0

    Effective: 48 (±2) %

    Application:

    It is made of selected advanced imported environmental nonionic surfactant with excellent degreasing capacity and suitable for degreasing raw leathers with high oil content.

    It dissolves in water quickly and is stable to acid, alkali, salts and tanning agents.

    It can provide perfect wetting, decontamination, antistatic and diffusion effects which help to the uniform penetration and absorption of chemical materials.

    It has good effect on removing lipid in hair follicles and fibers.

    This product does not contain APEO banned by the European Union and is easily biodegradable.

    Dosage:

    This product is suitable for use in various processes in various leather and fur processing.

    According to the fat content of the raw skin and the amount of the product, the dosage is generally 1-5%.

    Cowhide consumption: softening according to bare skin weight 1-1.5%

    Operational safety: avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions:store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging and transportation:120kg,150kg per plastic drum , non-dangerous goods, transport according to the general cargo.


    WanyaboAUX MT-60

    It is made up of a variety of nonionic surfactants with super emulsification ability.

    Attributes:

    Appearance:Light yellow transparent liquid

    Charge: non-ionic

    PH :(10% water solution ) 6.0-8.0

    Active substance: 58 (±2) %

    Features and uses:

    It is made of selected advanced imported environmental nonionic surfactant with excellent degreasing capacity and suitable for degreasing raw leathers with high oil content.

    It dissolves in water quickly and is stable to acid, alkali, salts and tanning agents.

    It has good wetting, emulsifying and penetrating, which is beneficial to the uniform permeation and absorption of the chemical.

    It is suitable for degreasing all kinds of leather with good effect on the emulsification of deep fat and helping chromium powder disperse into leather evenly.

    It has good stability to leather chemicals and hard water, and is not affected by PH value, which is applicable to various purposes without any foam during applying.

    This product does not contain APEO banned by the European Union and is easily biodegradable.

    Dosage:

    This product is suitable for use in various processes in various leather and fur processing.

    According to the fat content of the original skin and the amount of the product, it is generally 0.5-8%.

    Operational safety: avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions: store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging and transportation: 120kg,150kg per plastic drum , non-dangerous goods, transport according to the general cargo.


    WanyaboAUX MT-80

    It is made up of a variety of nonionic surfactants with super emulsification ability.

    Attributes:

    Appearance:Light yellow or colorless transparent liquid.

    Charge: non-ion

    PH: (1% water solution ) 6.0-7.5

    Active substance:70.0 (±2)%

    Performance and features:

    It has excellent penetration, wettability, emulsification and dispersion capacities.

    This product can remove the greasy dirt in leather surface completely, and emulsify, disperse and clean the grease inside leather.

    It has perfect degreasing effect on pig and sheep leather.

    This product does not contain APEO and is an environmentally friendly product.

    Scope of application:Suitable for all kinds of leather degreasing process.

    Instructions:

    Raw skin degreasing: dosage 1.0- 2.0%

    Deashing and degreasing: dosage 0.5-1.0%

    Blue skin degreasing: dosage 0.5-1.0% (shaved tare)

    This product is suitable for use in various processes in various leather and fur processing.

    According to the fat content of the original skin and the amount of the product, the dosage is generally 0.5-4%.

    Cowhide consumption: softening according to bare skin weight 1-1.5%

    Operational safety: avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions: store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging and transportation: 120kg,150kg per plastic drum , non-dangerous goods, transport according to the general cargo.


    WanyaboAUX MTB-300

    MTB-300 is based on 2- thiocyanomethylthiobenzothiazole, which is characterized by high efficiency, low toxicity and broad spectrum.

    Attributes:

    Content:T.C.MTB 30±1%

    Appearance:琥珀色或暗红色粘稠液体

    Solubility: easy to disperse evenly in water

    PH :5-7

    Storage safety: good at room temperature

    Characteristic:

    MTB-300 is suitable for use in the leather industry with an especially wide range of application. It is a kind of broad-spectrum mildew-retarding agent with low toxicity, high efficiency, and environmental protection, which has a strong ability to kill mold, and excellent antimould effect better than traditional mildew-retarding agent for leathers requiring long-term storage.

    Application:The amount used is about 0.05-0.1% of the weight after tare or peeling. Depending on the operating environment of each factory.

    Precautions:

    <1> Operators wear rubber gloves to operate

    <2> Only put the mold inhibitor into the water, and never pour the water into the mold inhibitor.

    <3> Do not touch the mold inhibitor directly with alkaline substances and avoid them.

    <4> Under no circumstances should it be used in a PH > 8.5 environment.

    <5> MTB-300 degrades slowly in water, so it should be used immediately when formulating MTB-300 emulsion.

    Storage conditions: store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging and transportation: 250kg per plastic drum , non-dangerous goods, transport according to the general cargo.

    WanyaboAUX M670

    Attributes:

    Main ingredients: Polyglycol ether mixture

    Active substance: 30 (±2.0) %

    Appearance: Light yellow or colorless transparent liquid

    PH:(1% water solution ) 6.0-7.5

    Ionicity: Nonionic

    Solubility: soluble in water

    Performance and features:

    It has excellent permeability, wettability and rewettability.

    It has good acid, alkali and hard water resistance stability.

    It has good water solubility and obvious effect on leather softening.

    It has no affinity with leather fibers, which helps to promote the penetration of resin retanning agents, dyes and fatliquoring agents.

    Scope of application: Widely used in the processing of various leathers.

    Instructions:

    Immersion: 0.2-0.8% (by wet weight of salt)

    Ash leaching: 0.2-0.6% (by wet weight of salt)

    Retanning, dyeing, fatliquoring: 0.2-0.5% (by salt wet tare)

    The specific process should be adjusted by the user after passing the sample.

    Operational safety: avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions: store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging, storage and transportation: 120KG per plastic drum, storage life for 6 months (room temperature). It belongs to non-hazardous chemical.

    WanyaboAUX NPO-C

    Attributes:

    Appearance:Light yellow liquid or paste.

    Light resistance: very good

    Active ingredients:40%

    PH:(10% water solution) 8-9

    Charge: non-ion

    Concentration:

    NPO-C is a kind of long carbon chain nonionic surfactant made of natural high carbon alcohols, which has excellent electrolyte resistance and good emulsifying capacity. Its acid, alkali and heavy metal ions resistances are much higher than common nonionic surfactants. This product can effectively improve the electrolyte resistance of various fatliquoring agents when used as leather fatliquoring agent, and produce leather with certain waxy touching feel. The existence of amide groups in molecules can make suede excellently silky. 

    Usage and dosage:

    This product is miscible with various surfactants and can be dissolved in warm water when used.

    When re-greasing, the amount added is 0.5-1.5% of the wet tare.

    When dyeing and fatliquoring, the amount added is 1-2.5% of the wet tare.

    Operational safety: avoid contact with eyes, skin and wounds. If accidental contact, rinse immediately with plenty of water.

    Storage conditions: store in a well-ventilated and cool warehouse, prevent from sunlight, freeze and water.

    Packaging and transportation: 120kg,150kg per plastic drum , non-dangerous goods, transport according to the general cargo.

极速3D